Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the door panel of the 2014 Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Door trim panel

See other generations:
Video tutorial

Today we will explain how to remove the door panel on a 2014 Peugeot 308 car. To perform this simple operation, we must first remove the metal cover of the handle using a plastic removal tool. After removing the outer part, we unscrew the screws using a Phillips screwdriver.

Using the same screwdriver, we also remove the central screw of the panel. Unscrew the screws that lock the bottom part of the panel and then use a plastic removal tool to detach the panel from the body and remove it completely.

Disconnect the connector and perform the desired maintenance. During the plastic removal process, it is important to be careful not to damage the hooks.


Posted on 15 November 2025 by ScegliAuto


Related tutorials

How to remove the door panel of a Peugeot 308?
How to remove the door panel of a Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) To remove the door panel of your Peugeot 308, start by taking a trim removal tool or a flat screwdriver wrapped in a cloth to avoid scratches, and un…
How to Remove the Rear Door Panel of a Peugeot 308 SW
How to Remove the Rear Door Panel of a Peugeot 308 SW
Peugeot 308 (2013-2021 / T9, MK 2) Before starting, open the rear door of your Peugeot 308 SW. Begin by prying out and removing the insert from the door panel's pillar using a thin but…
Disassembly of the rear door panel of the Peugeot 308
Disassembly of the rear door panel of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this short guide, we will see the instructions that will allow us to disassemble the rear door panel of the Peugeot 308. First, we open the rear d…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos