Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the Peugeot 2008 II

Model: Peugeot 2008 MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Battery

See other generations:
Video tutorial

To change the battery of the Peugeot 2008, we first need to locate it: it is located in the engine compartment, on the right side relative to the engine block, so in front of the passenger (with left-hand drive). We remove the battery hold-down bracket, disconnect the black cable (negative terminal) first, and then the red cable (positive terminal).

Next, we remove the old battery, clean the cable terminals thoroughly, and apply copper grease to the already connected terminals (this helps protect the outer part of the connection from oxidation). We position the battery in the compartment and connect the positive terminal first, then the negative one. We reattach the hold-down bracket.

Removing the battery resets the onboard electronics, so either have a battery maintainer or be prepared to re-enter the radio code, recalibrate the electric windows, and deal with the inconvenience that the start & stop system may not function in the first driving cycles.


Posted on 3 January 2026 by ScegliAuto


Related tutorials

How to Change the Language of the On-Board Computer in the Peugeot 2008?
How to Change the Language of the On-Board Computer in the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) In this tutorial, you will see how to change the language of the on-board computer in the Peugeot 2008, a very simple and quick operation to perform,…
How to Replace the Battery on a Peugeot 2008
How to Replace the Battery on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) To change the battery on a Peugeot 2008, open the bonnet and locate the battery. Disconnect the negative terminal first, followed by the positive ter…
How to Change the Key Fob Battery on a Peugeot 2008
How to Change the Key Fob Battery on a Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) To replace the battery in a Peugeot 2008 key fob, locate the small groove on the side or edge of the fob. Insert a plastic tool or a small flathead s…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos