Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What does the AdBlue warning light on the Peugeot 508 indicate?

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: AdBlue warning light

See other generations:
Video tutorial

The activation of the AdBlue warning light on a Peugeot 508 vehicle indicates a decrease in the fluid level in the tank, signaling to the driver that it is time to refill the fluid. The yellow warning light illuminates on the display along with the message "200 km remaining until vehicle shutdown"; in these cases, it is necessary to act promptly to avoid compromising the functionality of the emissions reduction system by going to a workshop or a service station to refill the fluid in the tank.

The warning light resets as soon as we start the vehicle's engine.


Posted on 9 January 2026 by ScegliAuto


Related tutorials

How to Top Up AdBlue and Reset the Warning Light on a Peugeot 508
How to Top Up AdBlue and Reset the Warning Light on a Peugeot 508
Peugeot 508 (2018-2026 / MK 2) In this guide, we will see the instructions to top up the AdBlue fluid and reset the warning light on a Peugeot 508. First, get inside the vehicle an…
How to Reset the AdBlue Warning Light on the Peugeot 508
How to Reset the AdBlue Warning Light on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Follow this guide to reset the AdBlue warning light on the Peugeot 508. First, get into the vehicle and turn on the ignition. Connect your diagnostic…
How to Deactivate the AdBlue Warning Light on the Peugeot 508
How to Deactivate the AdBlue Warning Light on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Today's guide will show you the steps to deactivate the AdBlue warning light on the Peugeot 508, following the instructions below. First, top up the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos