Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the second series Peugeot 3008 without risking losing data?

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Battery

A premise is necessary; what is shown in the video is valid for any car and not just for the second series Peugeot 3008. Achieving what is specified is simpler than one might think; in fact, what is needed is a pair of specific jump-start cables, which we will connect between the battery to be replaced and a third battery, called a buffer battery. We disconnect the positive and negative terminals of the vehicle, remove the exhausted battery, install the new one, reconnect the aforementioned cables, and then remove the previously mentioned jump-start cables. Operation completed.

Posted on 11 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the battery of the Peugeot 3008 key.
How to change the battery of the Peugeot 3008 key.
Peugeot 3008 (2016-2023 / MK 2, P84) To change the small battery inside the key of your Peugeot 3008 second series (2019), simply follow the procedure described in this new guide. First,…
How do you set the clock in the first generation Peugeot 3008?
How do you set the clock in the first generation Peugeot 3008?
Peugeot 3008 (2009-2016 / MK 1, T84) The transition from daylight saving time to standard time and vice versa, or the resetting of various data, including the time, force us to make adju…
How to replace the battery of the Peugeot 3008
How to replace the battery of the Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) Below are the main steps useful for disassembling and replacing the battery of the Peugeot 3008. First, open the hood of the car and start by disasse…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos