|
Do it yourself
| |||
| ||||
How to change the cabin air filter of the Peugeot 3008
Model: Peugeot 3008
T84, MK 1
- Years 2009-2016
On the Peugeot 3008, the cabin air filter is accessed from the passenger side, working in the area under the dashboard and near the glove compartment. In the video, the process begins by freeing up access: the lower plastic panel under the glove compartment is removed by unscrewing the visible screws and lowering the cover to create space to maneuver. Once the work area on the Peugeot 3008 is opened, the filter holder is reached, and the access door is released. From there, the old filters are pulled out: the tutorial shows that the Peugeot 3008 has two separate filters, so the extraction is done one at a time, sliding each filter out of its seat without bending it too much. With the new filters ready, the replacements are inserted into the same spot on the Peugeot 3008, one at a time, guiding them into the housing until they fit correctly. Once the housing is closed, the access door is put back, and the reassembly begins: the lower panel is returned to its place, and the screws are re-tightened, restoring the area under the dashboard of the Peugeot 3008 to its original condition.
Posted on 17 January 2026 by ScegliAuto
Video tutorial
Related tutorials
Peugeot 3008
(2009-2016 /
T84, MK 1)
Replacing the cabin air filter or pollen filter on a Peugeot 3008 is a very simple task that can be done in a few steps. The cabin air filter is loca…
Peugeot 3008
(2009-2016 /
T84, MK 1)
How to replace the cabin air filter in a Peugeot 3008? Start by removing the cover located on the right side of the glove compartment (unscrew the se…
Peugeot 3008
(2016-2023 /
MK 2, P84)
In the following guide dedicated to all of you who own a 2016 Peugeot 3008, we will help you complete the replacement of the cabin air filter. Before…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.138
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
