|
Do it yourself
| |||
| ||||
How to Discover if the Injectors of a Peugeot or Citroen Engine are Leaking
Model: Peugeot 107
MK 1
- Years:
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
In this video, you can see a very simple technique to check if the injectors of a Peugeot or Citroen engine are leaking. You only need a plastic cup and a bit of water. While the engine is running, pour a small amount of water over the injectors. As shown in the video, when you find the leaking injector, you will see a sort of jet coming from the faulty injector. Do not worry about the water entering by capillarity because the injector is no longer airtight: indeed, with the pressure from the pistons, it is impossible for anything to enter the engine. Think of car washes, especially the professionals who wash engines with pressure washers! What harm could a drop of water possibly do!
Posted on 30 January 2026 by ScegliAuto
Related tutorials
Peugeot 107
(2005-2014 /
MK 1)
In this video tutorial, you will learn how to adjust the clutch cable, and consequently the pedal, on a Citroen C1 or Peugeot 107, following these si…
Peugeot 107
(2005-2014 /
MK 1)
This guide outlines the main steps to dismantle and replace the centre console of the Peugeot 107 and Citroen C1. First, get in the vehicle and start…
Peugeot 107
(2005-2014 /
MK 1)
In this guide, you will see how to correctly adjust the clutch cable on the Peugeot 107, as well as on its siblings, the Citroen C1 and Toyota Aygo. …
Other guides you may be interested in |
How to Reset the Tire Pressure Light on a MG ZS?
On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.019
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
