Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Peugeot e-208

Model: Peugeot 208 UP, UW, UB, UJ, MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

Unlike Peugeots with internal combustion engines, which use the trip odometer, the e-208 uses the button located at the bottom of the wiper lever (or the headlights, depending on the trim). Turn on the ignition, and from the central display, press the "check" button.

Check the remaining kilometres until the service (or verify if it is overdue), turn off the ignition (set to "off"), and then turn the ignition back on. Hold the button located at the top of the lever: the display will show a countdown from 10 to 0. When it reaches zero, the orange key resets.

Release the button, then press "check" again on the central display to see the new service interval.


Posted on 28 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Peugeot 208?
How to Reset the Service Light on a Peugeot 208?
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) To reset the service light on a Peugeot 208, turn on the instrument panel and navigate to the menu that appears on the central touchscreen display. S…
How to Reset the Service Light on Peugeot 208?
How to Reset the Service Light on Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) To reset the Service light on a Peugeot 208, you need to enter the cabin and press the SET button located under the display. While holding it down, i…
How to Reset the Service Light on the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) Resetting the service light on the Peugeot 208 is not difficult at all. The same procedure can also be applied to similar car models. To start, befor…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos