Do it yourself
| ||||
|
Peugeot 208 - Video tutorial
Model: Peugeot 208
A9, MK 1
- Years 2012-2019 Resetting the service warning light on the Peugeot 208 is not difficult at all. The same procedure can also be applied to similar car models. To start, even before turning the key to turn on the instrument panel, let's find the button that resets the warning light. As shown in the video, it is the one on the far right and has a wrench pictured above. Let's keep it pressed and in the meantime turn the key and turn on the ignition (but don't start the engine!). A 10-second countdown will start on the display at the end of which we can turn off the instrument panel and release the button. We will have thus reset the service warning light.
Posted on 28 June 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.041
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |