Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulbs on a Peugeot 3008

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Tail light bulb

How to replace the rear headlamp bulbs on a Peugeot 3008? Follow these steps: open the boot and use a screwdriver to unscrew the securing screws located at the sides of the rear headlamp; once the headlamp is free from any constraints, disconnect it from the bodywork (unplug the relevant power connectors). Replace the damaged bulbs with identical ones of the same size and voltage. Finally, refit the headlamp and reverse the assembly process. Test the correct operation of the installed lights.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Rear Light Bulbs on Peugeot 3008
Replace the Rear Light Bulbs on Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Want to replace the rear light bulbs on a Peugeot 3008 but don't know how? Here's how: open the tailgate and using a screwdriver, unscrew (with a soc…
How to disassemble the rear headlight of the Peugeot 3008 and 5008
How to disassemble the rear headlight of the Peugeot 3008 and 5008
Peugeot 3008 (2009-2016 / T84, MK 1) The right rear light of the Peugeot 3008 can be removed from its housing following the same procedure used for removing the rear light of the Peugeot…
How to disassemble the rear light of the Peugeot 3008
How to disassemble the rear light of the Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) In the following article, we will show you the procedure for disassembling the rear headlight of the Peugeot 3008. For this operation, a 10mm socket …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos