|
Do it yourself
| |||
| ||||
Where is the DPF Pressure Sensor on the Peugeot 5008
Model: Peugeot 5008
MK 2
- Years:
2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Video tutorial
On the second generation Peugeot 5008, the position of the DPF differential pressure sensor may vary slightly depending on the engine, but it is typically located in the engine bay, on the right side of the car, near the windscreen. It is mounted on the exhaust manifold, near the DPF, often secured with two screws. It has two flexible pipes going to the DPF, one before and one after the filter, to measure the pressure difference; it is connected to the engine control unit via a 3 or 4 PIN electrical connector. Open the bonnet and locate the DPF, which is a large metal cylinder along the exhaust line, towards the rear of the engine; look for a small metal sensor (about 5x5) secured to a bracket with two tubes connected to the DPF, and an electrical connector.
Posted on 5 July 2026 by ScegliAuto
Related tutorials
Peugeot 5008
(2017-2024 /
MK 2)
The tire pressure sensor displayed on the instrument panel of the Peugeot 5008 can be reset by turning on the instrument panel, so that it is possibl…
Peugeot 5008
(2009-2016 /
MK 1)
The tire anomaly warning of a car, in this specific case of the Peugeot 5008 shown in the video here, should always and in any case prompt us to chec…
Peugeot 5008
(2017-2024 /
MK 2)
To reset the tire pressure warning light on the Peugeot 5008, you need to inflate the tires until they reach the recommended pressure value: this val…
Other guides you may be interested in
|
How to Open the Hood of the BMW X3
Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
