Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location and operation of the tyre repair kit on a Peugeot 508

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Accessory kit

This video shows where the tyre repair kit for the Peugeot 508 is located: it is found in the boot, under the load floor, contained in a box with the electric compressor and sealing liquid. Remove the kit and place it next to the flat tyre; connect the compressor to the car's 12V socket, keeping the engine running; unscrew the valve cap and connect the hose to the kit; inject the sealing liquid (first the liquid, then the air), inflate the tyre to the pressure indicated by the manufacturer, and drive for a few miles to distribute the sealant within the tyre. Stop and recheck the tyre pressure, then go directly to a tyre specialist for a permanent repair.

Posted on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Peugeot 508?
How do you reset the tire pressure warning light on the Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) In order to reset the tire pressure warning light of the Peugeot 508, you need to inflate the tires until they reach the corresponding pressure value…
Replacement of the cabin fan of the Peugeot 508.
Replacement of the cabin fan of the Peugeot 508.
Peugeot 508 (2010-2018 / MK 1) This short and simple guide will show us how to disassemble and replace the cabin fan along with its motor in the Peugeot 508. First, we get on board…
How do you reset the tire pressure warning light on the Peugeot 508?
How do you reset the tire pressure warning light on the Peugeot 508?
Peugeot 508 (2018-2026 / MK 2) The procedure for resetting the tire pressure warning light on the Peugeot 508 involves inflating the tires until they reach the optimal pressure val…

Other guides you may be interested in

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos