Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Fuel Filter on a Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Diesel fuel filter

See other generations:
Video tutorial

How to change the fuel filter on a Peugeot 208? Follow these steps. Lift the bonnet and secure it. Use a socket spanner to unscrew the fuel filter nuts and remove them (as shown in the video).

Disconnect the filter from its housing and detach the various circulation pipes. Once the filter is removed, take it out of the vehicle (replace it with a new filter).

Finally, refit the filter in the specific housing (connect the pipes and cables) and tighten the nuts. Close the front bonnet at the end of the maintenance.

Start the car to check for proper operation.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

How to change the air filter of the Peugeot 208
How to change the air filter of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) If you are looking for a guide to help you complete the replacement of the engine air filter for your Peugeot 208, then all you have to do is pay att…
Replacing the Fuel Pump on a Peugeot 208
Replacing the Fuel Pump on a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Follow these instructions to remove and replace the fuel pump on a Peugeot 208 in simple steps. First, open the rear doors and start by removing the …
How to replace the air filter of the Peugeot 208
How to replace the air filter of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) The engine air filter in your first edition Peugeot 208 plays a very important role, that is to allow the engine to breathe and therefore to perform …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos