Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Warning Light on Peugeot 508

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Warning light – error code

How to turn off the warning light on the dashboard of a Peugeot 508? Let's see how to reset the maintenance light. Turn on the dashboard with the key, check the warning light illuminated on the information display. Turn on the dashboard with the key, press the button located below the onboard computer display (right button). Press the button until the service reset warning light resets (count down seconds). Turn off and turn on the dashboard again with the key: the maintenance completion with the mileage will appear. Use the buttons below the display to make various settings.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Peugeot 508
How to reset the service light on the Peugeot 508
Peugeot 508 (2018-2026 / MK 2) To correctly reset the service light of your second series Peugeot 508, simply follow the procedure described. The entire operation requires very lit…
How to reset the service light on the Peugeot 508
How to reset the service light on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) The service light activates on the vehicle when it is necessary to perform the car service, immediately after we can proceed with the reset of the se…
How to Reset the AdBlue Warning Light on the Peugeot 508
How to Reset the AdBlue Warning Light on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Follow this guide to reset the AdBlue warning light on the Peugeot 508. First, get into the vehicle and turn on the ignition. Connect your diagnostic…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos