Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Car Radio for Repair

Model: Peugeot 107 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Car stereo

Video tutorial

Using a screwdriver, undo the retaining screw located above the climate control under the fan knob. Using a plastic tool to avoid marking the bodywork, lever in the designated notches to release the retaining clips of the side panel on the left and right of the dashboard and remove it. Also undo the other screw of the dashboard, then carefully pull the entire radio unit outwards, being mindful of the connected cables.

Disconnect the rear connections to free the radio, then remove it gently. To reassemble, follow the same steps in reverse.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

How to Remove the Car Radio in the Peugeot 107
How to Remove the Car Radio in the Peugeot 107
Peugeot 107 (2005-2014 / MK 1) In today's video, learn how to remove the car radio in the Peugeot 107. This tutorial also applies to the sister models Citroen C1 and Toyota Aygo of…
How to replace the car radio in the Peugeot 107?
Peugeot 107 (2005-2014 / MK 1) In this tutorial we can see how to replace the car radio in the Peugeot 107, an extremely simple and quick operation. First of all, make sure that th…
Disassembly of the cabin fan of the Peugeot 107.
Disassembly of the cabin fan of the Peugeot 107.
Peugeot 107 (2005-2014 / MK 1) In this guide, we will go through the main steps on how to disassemble and replace the cabin fan motor of the Peugeot 107. First, we get inside the v…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos