Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Centre Console on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Center console tunnel

To start, remove the entire lower frame of the climate control area, then take off the rubber parts (cup holder and can holder) and the plastic structure located beneath the rubber parts. Now unscrew the two side Torx screws on the tunnel and the central screw that we have 'uncovered' thanks to the previous removals. Remove the small waste drawer. Now you can gently pull the plastic of the tunnel upwards, remembering to disconnect all wiring (the one related to the rear airbag will be a bit tricky). With this procedure, if necessary, you can also replace the 12V socket near the gear lever, which will now be clearly visible.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 206 (1998-2012 / MK 1) Is the gear knob on your Peugeot 206 damaged? Let’s see how to remove it from the top of the centre console. Use a plastic lever to disconnect the le…
Peugeot 206 (1998-2012 / MK 1) Below we will see the main instructions that will allow us to disassemble and replace the lock and central locking of the Peugeot 206. First, we open…
Peugeot 206 (1998-2012 / MK 1) Let's see how to remove the heating radiator from a Peugeot 206. Remove the plastic covering of the central tunnel (using appropriate plastic or meta…

How to Replace the Cabin Filter on the Opel Grandland X

If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done.

Watch the video!


by ScegliAuto

More videos