Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : How to remove the Peugeot 307 air conditioning panel

Peugeot 307 - Video tutorial

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Air conditioning
Operation: How to remove the Peugeot 307 air conditioning panel

The guide shows how to remove the central panel of the dashboard of the Peugeot 307. First you have to remove the garbage drawer using the iron tab and unscrew the two screws placed in the housing. In order to remove the lower panel, the gearbox cover must be removed using the four pins at the corners. At this point, using plastic levers you can force the upper corners of the grille (lower side of the radio housing) and extract it. The upper grille is disassembled after having unscrewed the two lower and two upper screws (hidden by the two fake buttons near the four arrows). With a T20 screwdriver it is possible to remove the four fixing screws of the climate panel; a slight pressure must be applied to release the block and, by tilting it upwards and disconnecting the large connector and then the small ones and the regulation wire, extract the air conditioner.


Posted on 1 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 307 2001-2009 - What problems on the air conditioning of the Peugeot 307? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos