Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Replacing the lock on Peugeot 206

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Lock
Operation: Replacing the lock on Peugeot 206

Do we want to remove the cover panel on a Peugeot 206? Let's see how the cover panel and the lock are removed. Before starting the disassembly work, let's disconnect the battery terminals in the engine compartment. We unscrew the screws placed in the handle on the door panel, unscrew the screws placed on the perimeter of the door panel. With our hands we detach the cover of the corner of the door panel, then, with a plastic lever we detach the clips on the panel, we grab the panel with our hands and levering it off from the door. We identify the lock located inside the door and unscrew the tightening screws.


Posted on 4 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 206 1998-2012 - What to do if the rear door is locked on Peugeot 206? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos