Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Service Indicator for Upcoming Maintenance

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Service warning light

The reset operation is not difficult; it just requires a bit of attention. To reset the mileage indicator on the onboard computer for the next maintenance service, perform the following steps. Turn the ignition key to the off position. Locate the button on the right side of the instrument panel, press and hold it, then turn the ignition key to switch on the instrument cluster. At this point, release the button. Turn off the ignition, wait a few seconds, and then turn it back on to verify that the reset has been successful.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Maintenance Mileage on Peugeot 106
Resetting the Maintenance Mileage on Peugeot 106
Peugeot 106 (1991-2004 / MK 1) In this video tutorial, you will learn how to reset the mileage, and thus the warning light, for routine maintenance on a Peugeot 106, but also on ot…
How do you reset the Service light on the Peugeot 106?
How do you reset the Service light on the Peugeot 106?
Peugeot 106 (1991-2004 / MK 1) To reset the Service light on the Peugeot 106, you need to press and hold the button located on the left side of the instrument panel while it is tur…
Removing Ignition Coils
Removing Ignition Coils
Peugeot 106 (1991-2004 / MK 1) It is recommended to perform this maintenance with a cold engine to avoid unpleasant burns, as the spark plugs play a crucial role in fuel combustion…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos