Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 106
    4. : Removing the spark plugs

Peugeot 106 - Video tutorial

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Spark plugs
Operation: Removing the spark plugs

In the following video we will show you an operation that is, more or less, within everyone's reach but even if it is an apparently simple job, this does not mean that the necessary precautions must be taken. To begin with, park your car safely. Open the hood, disconnect the battery and remove the coil of each individual spark plug or for safety, if you prefer, remove one coil at a time as you go to change the respective spark plug. Place the key and unscrew the spark plug. Pull the candle out so it doesn't pop out of the key. Reposition the new one and screw it slowly evenly without forcing, so as not to damage the thread. Tighten the spark plug and reinstall the coil. Car model: Peugeot 106 s16 Tools required: Spark plug wrench


Posted on 14 August 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos