Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly and Repair of Car Radio Antenna

Model: Peugeot 106 MK 1 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Car stereo

Video tutorial

This operation involves the complete disassembly of the interior light. The second step consists of removing the plastic trim from the roof held by two clips.

Disconnect the connector if available and, using a 22mm ratchet spanner, undo the retaining bolt of the antenna. Remove the antenna and unscrew the two screws under the support to check the condition of the circuit inside it. If there is any corrosion due to water ingress, it is advisable to replace the entire antenna.

Refit the antenna, ensuring that the rubber seal on the base is properly seated.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Guide to Removing the Car Radio
Guide to Removing the Car Radio
Peugeot 106 (1991-2004 / MK 1) Follow the simple steps in this guide to remove the car radio from your vehicle. For the disassembly of the radio, it is advisable to follow the inst…
How to disassemble the standard car radio of the Peugeot 106
How to disassemble the standard car radio of the Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Today's information will allow us to disassemble and replace the standard radio of the Peugeot 106. First, we get into the car and start inserting th…
Guide to Removing the Starter Motor of the Peugeot 106
Guide to Removing the Starter Motor of the Peugeot 106
Peugeot 106 (1991-2004 / MK 1) This guide briefly outlines the steps to remove, replace, or repair the starter motor of the Peugeot 106, following the instructions below. First, op…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos