Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 106
  6. : Guide to extracting the car radio

Peugeot 106 - Video tutorial

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Car stereo
Operation: Guide to extracting the car radio

By following the simple steps that the following guide shows you will be able to take out the car stereo from your car. To disassemble the car radio it would be better to follow the instructions given in the instruction manual of your car. Insert some levers on the sides of the car radio, in order to release the internal hooks and pull it towards you. Once this has been done, you can move on to disconnect the car radio connectors by pressing the side lever of the connectors and pulling them outwards. Once this is done you can detach the antenna, a cylindrical black connector. Finally, there is nothing left to do but insert the new car radio.


Posted on 29 July 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos