Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Car Radio for Repair

Model: Peugeot 106 MK 1 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Car stereo

Video tutorial

To remove the car radio from the console, insert the appropriate tools into the side slots of the radio to release the retaining springs. At this point, pull the radio out of the compartment, carefully disconnecting the connectors.

Perform the same operation on the cassette player to extract it from the console; therefore, insert the appropriate tools into the side slots of the player to release the retaining springs, then pull it out of its housing, removing the connectors. To reinstall the equipment, simply reconnect the connectors and gently insert the radio or player into their compartment, taking care not to pinch the electrical cables.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Disassembly and Repair of Car Radio Antenna
Disassembly and Repair of Car Radio Antenna
Peugeot 106 (1991-2004 / MK 1) This operation involves the complete disassembly of the interior light. The second step consists of removing the plastic trim from the roof held by t…
Guide to Removing the Car Radio
Guide to Removing the Car Radio
Peugeot 106 (1991-2004 / MK 1) Follow the simple steps in this guide to remove the car radio from your vehicle. For the disassembly of the radio, it is advisable to follow the inst…
Instructions for Disassembling Front Seat
Instructions for Disassembling Front Seat
Peugeot 106 (1991-2004 / MK 1) Disassembling the front seat is very straightforward: it involves removing the fixing bolts (these are Torx type) from the seat's sliding rails. Slid…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos