Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Ignition Coils

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Ignition coil

It is recommended to perform this maintenance with a cold engine to avoid unpleasant burns, as the spark plugs play a crucial role in fuel combustion. Once the engine has cooled down, open the front bonnet and locate the coil pack, which is situated in the central area of the engine and consists of a plastic bar that integrates both the coils and the leads. Unscrew the fastening screws, disconnect the side connector, and remove the complete coil pack with leads. At this point, reverse the steps for installation.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Rear Shock Absorber Replacement
Rear Shock Absorber Replacement
Peugeot 106 (1991-2004 / MK 1) To replace the shock absorber, lift the vehicle on a hydraulic lift and, if necessary, support the rear wheel during disassembly to prevent the weigh…
Instructions for Disassembling Front Seat
Instructions for Disassembling Front Seat
Peugeot 106 (1991-2004 / MK 1) Disassembling the front seat is very straightforward: it involves removing the fixing bolts (these are Torx type) from the seat's sliding rails. Slid…
Disassembly and Repair of Car Radio Antenna
Disassembly and Repair of Car Radio Antenna
Peugeot 106 (1991-2004 / MK 1) This operation involves the complete disassembly of the interior light. The second step consists of removing the plastic trim from the roof held by t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos