Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Spark Plug Leads on a Peugeot 106

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Spark plugs

In this brief and simple guide, follow the main steps to remove and replace the spark plug leads on a Peugeot 106. First, open the bonnet of your car and disconnect the leads from the coil; then remove the caps from the actual spark plugs. At this point, separate the connector from the lead to replace it with a new one; purchase either the complete kit of connectors and wiring. Finally, install the wiring on the ignition coil and connect the leads to the four spark plugs in the engine!

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change Fuel Filter on Peugeot 106
How to Change Fuel Filter on Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Learn how to change the fuel filter on a Peugeot 106. Lift the car with a jack, then locate the position of the fuel filter. Disconnect the wires and…
Guide to Removing the Starter Motor of the Peugeot 106
Guide to Removing the Starter Motor of the Peugeot 106
Peugeot 106 (1991-2004 / MK 1) This guide briefly outlines the steps to remove, replace, or repair the starter motor of the Peugeot 106, following the instructions below. First, op…
Replacing the Fuel Pump on a Peugeot 106
Replacing the Fuel Pump on a Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Follow this guide to remove and replace the fuel pump on a Peugeot 106. First, open the boot and start reclining the rear seats; then lift the rear b…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos