|
Do it yourself
| |||
| ||||
How to Reset the AdBlue Warning Light on a Peugeot 308?
Model: Peugeot 308
T9, MK 2
- Years:
2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Video tutorial
When the UREA warning light flashes on the Peugeot 308 display, it means that you need to top up the AdBlue additive, as it is at a too low level. The cap for topping up is located in the boot, under the mat where the spare wheel is also placed: it is advisable to use a funnel to pour the liquid into the tank. When finished, close the tank with the appropriate cap. If the warning light continues to flash even after topping up, it may be necessary to use an OBD scanner to reset the light, as shown in the video.
Updated on 20 April 2026 by ScegliAuto
Related tutorials
Peugeot 308
(2013-2021 /
T9, MK 2)
This guide explains how to reset the AdBlue warning light on the Peugeot 308, as well as the 3008. Before resetting, ensure that the AdBlue fluid is …
Peugeot 308
(2013-2021 /
T9, MK 2)
This guide provides the main instructions to reset the AdBlue warning light on the Peugeot 308. Before resetting the light, ensure you have topped up…
Peugeot 308
(2013-2021 /
T9, MK 2)
When the AdBlue light illuminates on the Peugeot 308 display, it means that the level of additive liquid in the designated tank is insufficient. To r…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
