Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on the Peugeot 208 1.6 HDI

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Diesel fuel filter

In today's tutorial video, learn how to remove and replace the diesel filter on the Peugeot 208 with a 1.6 HDI engine. First, open the bonnet of your car and start by removing the upper engine cover; then disconnect the two fuel inlet and outlet pipes leading to the filter, followed by disconnecting the electrical connector. At this point, use a 24 mm socket to unscrew and remove the diesel filter, as shown in the video; simply replace it with the new one, following the video to the end for reassembly!

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Diesel Filter on Peugeot 208
How to Replace the Diesel Filter on Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) How to replace the diesel filter on Peugeot 208? Follow these steps: open the car door and pull up the engine compartment release lever located at th…
How to Replace the Fuel Filter on a Peugeot 208?
How to Replace the Fuel Filter on a Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To replace the fuel filter on a Peugeot 208, open the bonnet and remove the plastic cover from the top of the engine. Next, disconnect the hoses conn…
How and When to Replace the Timing Belt on the Peugeot 208 1.6 HDI
How and When to Replace the Timing Belt on the Peugeot 208 1.6 HDI
Peugeot 208 (2012-2019 / A9, MK 1) Today's guide provides the main instructions for removing and replacing the timing belt on the Peugeot 208 1.6 HDI; for this engine type, the manufac…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos