Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Belt and belt tensioner replacement

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Timing belt
Operation: Belt and belt tensioner replacement

Get replacement belts. Loosen the wheel nuts and lift the car to secure it. Unscrew the bolts and remove the wheel, brake, mudguard and casing. Remove the protective casing and with the help of a fixed wrench and the special tool lock the pulley and loosen the belt tensioner. By levering the belt tensioner, loosen the tension to remove the belt. Remove the bolts of the two belt tensioner supports and take them off. Replace the pulleys and tensioners with new ones, making sure to reassemble all parts correctly. Fit the tensioners and new belts following the assembly diagram.


Posted on 19 July 2023 by ScegliAuto



Repair of the alternator with replacement of the belt
Peugeot 206 (1998-2012 / MK 1) Disconnect the negative pole of the battery and move the cable away. Raise the car on the bridge, open the bonnet and unscrew the screws holding the
Peugeot 206 service belt replacement
Peugeot 206 (1998-2012 / MK 1) Using a ratchet wrench, unscrew the bolts of the pin under the belt and of the fixing pin (see video demonstration). Unscrew the belt tensioner with
Distribution replacement of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) We remove the timing belt of the Peugeot 206 if it needs to be changed. Changing the timing belt is very important in order not to damage the engine.

    Frequently Asked Questions

    • 206 1998-2012 - At how many km to change the timing belt in the Peugeot 206? Read Answer
    • 206 1998-2012 - How much does the timing belt cost on a Peugeot 206 1.4 hdi? Read Answer
    • 206 1998-2012 - How much does the Peugeot 206 14 HDi distribution kit cost? Read Answer
    • 206 1998-2012 - How much does it cost to replace the timing belt on the Peugeot 206 1.4 hdi? Read Answer

How do you open the fuel flap of the Volkswagen Golf 5?

In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism.

Watch the video!


by ScegliAuto

More videos