Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Peugeot 206 service belt replacement

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: V-belt
Operation: Peugeot 206 service belt replacement

Using a ratchet wrench, unscrew the bolts of the pin under the belt and of the fixing pin (see video demonstration). Unscrew the belt tensioner with a torx wrench to loosen the belt tension; once removed, check that the belt tensioner bearing has no play (it is advisable to replace it if necessary) and reposition the new service belt between the pulleys. Tighten the belt tensioner again to give the correct tension again and re-close the pin and support bolts unscrewed previously. Run the engine and if the belt turns correctly you are done.


Posted on 14 November 2023 by ScegliAuto



Distribution replacement of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) We remove the timing belt of the Peugeot 206 if it needs to be changed. Changing the timing belt is very important in order not to damage the engine.
How to replace the V-belt on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In order to replace the V-belt of the Peugeot 206, the car must be lifted using a bridge; it will be necessary to pull the grooved part of the tensio
How do you replace the timing belt of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) The replacement of the timing belt on the Peugeot 206 is done by loosening the bolts that secure the right front wheel, so that the fastening rivets

How do you open the fuel flap of the Volkswagen Golf 5?

In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism.

Watch the video!


by ScegliAuto

More videos