Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Halfshaft Fixing Nut

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Bearing

Video tutorial

Once the vehicle is lifted and the front wheel is removed, the halfshaft fixing nut is located at the centre of the hub; this nut has indentations made with a hammer and chisel to prevent it from accidentally loosening (in some cases, a safety pin is also present); therefore, before unscrewing the nut, it is necessary to re-flatten the indentations to avoid damaging the thread of the halfshaft during dismantling: use a punch or screwdriver and with a hammer, straighten the indentations of the nut, then proceed to unscrew the nut itself using a pneumatic gun.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Replacing Wishbone on Peugeot 206
Replacing Wishbone on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this video, you will learn how to remove the wishbone from a Peugeot 206. First, remove the wheel and lift the car: then, unscrew the central hub …
Instructions for Removing the Exhaust Silencer
Instructions for Removing the Exhaust Silencer
Peugeot 206 (1998-2012 / MK 1) It is recommended to carry out this removal with the engine cold to avoid unpleasant burns. Once the vehicle is positioned on a lift, equip yourself …
Injector Rail Disassembly Instructions
Injector Rail Disassembly Instructions
Peugeot 206 (1998-2012 / MK 1) The injector rail is located just below the intake manifold and is secured to the engine block with bolted plastic tabs; in the video, the disassembl…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos