Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the serpentine belt on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: V-belt

In this video, we can see how to change the service belt on a Peugeot 206: to do this operation, it will be necessary to lift the car using jacks, then we will have to pull aside the tensioner pulley of the service belt, in order to remove it. Put the pulley back in position, after checking its condition of use: it might be a good idea to replace it. Install the new belt making sure it adheres firmly to all the rollers. Pull aside the tensioner pulley and use a 3/8" square drive for the oil drain plug; reposition the pulley in its original position and let the engine run for a few minutes to verify the functionality of the component. We can lower the car: the job is done.

Posted on 28 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Serpentine Belt on a Peugeot 206?
How to Replace the Serpentine Belt on a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To replace the serpentine belt on a Peugeot 206, lift the car using a ramp. Pull the ribbed part of the tensioner pulley using the square drive of th…
How to replace the serpentine belt of the Peugeot 206 1.4 HDI
How to replace the serpentine belt of the Peugeot 206 1.4 HDI
Peugeot 206 (1998-2012 / MK 1) Today's main instructions will show us how to disassemble and replace the serpentine belt of the Peugeot 206 1.4 HDI. First, we lift the vehicle and …
Replacing the Timing Belt on a Peugeot 206 1.4 HDi
Replacing the Timing Belt on a Peugeot 206 1.4 HDi
Peugeot 206 (1998-2012 / MK 1) Next, we will discover the steps that will allow you to disassemble and replace the timing belt on the Peugeot 206 1.4 HDi. First, lift the vehicle a…

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos