Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Door trim panel

See other generations:
Video tutorial

Using a trim tool or a small flat screwdriver (a plastic wedge that won't scratch the plastics is recommended), remove the window switch panel and disconnect its connector. Remove the frame of the opening handle and the cover of the central handle, then unscrew the underlying screws.

Also unscrew the side screws, and finally, begin to extract the panel by inserting the trim tool into the gap around it. Gradually pull the panel out of the door and disconnect the internal cables. Reverse the process for reassembly.

Cheers!


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel of a Peugeot 308 SW
How to Remove the Rear Door Panel of a Peugeot 308 SW
Peugeot 308 (2013-2021 / T9, MK 2) Before starting, open the rear door of your Peugeot 308 SW. Begin by prying out and removing the insert from the door panel's pillar using a thin but…
Disassembly of the rear door panel of the Peugeot 308
Disassembly of the rear door panel of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this short guide, we will see the instructions that will allow us to disassemble the rear door panel of the Peugeot 308. First, we open the rear d…
How to remove the door panel of a Peugeot 308?
How to remove the door panel of a Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) To remove the door panel of your Peugeot 308, start by taking a trim removal tool or a flat screwdriver wrapped in a cloth to avoid scratches, and un…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos