Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on a Peugeot 508

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

Get in the car and turn on the instrument panel but do not start the engine (this should not be necessary). Press and hold the button with three zeros located below the panel, and while doing this, start the engine.

At this point, a countdown will start as clearly shown in the video. Keep the button pressed until the end of the ten-second countdown, and the reset will be completed.

Turn off and then turn on the ignition as a final check. Remember not to perform the reset unless you have actually completed the service to avoid damaging the engine or the vehicle in general.

Goodbye!


Updated on 27 April 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Peugeot 508
How to reset the service light on the Peugeot 508
Peugeot 508 (2018-2026 / MK 2) To correctly reset the service light of your second series Peugeot 508, simply follow the procedure described. The entire operation requires very lit…
How to reset the service light on a Peugeot 508
How to reset the service light on a Peugeot 508
Peugeot 508 (2018-2026 / MK 2) Resetting the service light on the Peugeot 508 is done via the dashboard display. With the ignition off, press and hold the "000" or "Trip" button on…
How to Reset the Service Light on the Peugeot 508
How to Reset the Service Light on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Resetting the service light for the car service on a Peugeot 508 follows simple and quick steps that can be done independently. Peugeot vehicles, lik…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos