Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fog Light Replacement on Jeep Renegade

Model: Peugeot 1007 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Fog lights

Video tutorial

Want to replace the fog light on your Jeep Renegade? Let's see how to remove it from inside the front bumper of the Jeep. Remove the plastic cover from above the bumper. Once the cover is removed, unscrew the securing screws of the fog light: disconnect the light and replace the bulb with a new one (same size and voltage).

Refit the fog light inside the front bumper, screw in the securing screws, and reattach the plastic cover. Test the correct operation of the new fog light after completing the installation.


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Change the Front Headlight Bulb on a Skoda Rapid
How to Change the Front Headlight Bulb on a Skoda Rapid
Peugeot 1007 (2005-2010 / MK 1) Let's see how to remove the front headlight bulb on a Skoda Rapid. Lift the front bonnet by pulling the lever located at the bottom right of the dash…
Removing the Third Brake Light on Toyota RAV 4
Removing the Third Brake Light on Toyota RAV 4
Peugeot 1007 (2005-2010 / MK 1) Learn how to remove the third brake light of the Toyota RAV 4 to replace it or change the bulbs inside. Lift the tailgate, remove the plastic cover a…
How to remove the front seat of the Peugeot 1007
How to remove the front seat of the Peugeot 1007
Peugeot 1007 (2005-2010 / MK 1) Today we will discover the instructions that will allow us to disassemble and replace the front seat of the Peugeot 1007. First, we open the front do…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos