Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Number Plate Lights on Peugeot 5008 and 3008

Model: Peugeot 5008 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: License plate light

See other generations:
Video tutorial

Lift the boot lid halfway. Remove the covers of the number plate lights by inserting a flat screwdriver or a plastic wedge into the gap on your right.

At this point, the bulbs are "exposed" and you can access them: to remove them, use the small flat screwdriver and push them from behind until they come out of their socket, as shown in the video. Now, simply insert the new bulbs you have purchased, which should be equivalent to the originals, and you're done.

The video also shows how to switch from bulbs to LED lights.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

Resetting the Tyre Pressure Warning Light on the Peugeot 5008 - 3008
Resetting the Tyre Pressure Warning Light on the Peugeot 5008 - 3008
Peugeot 5008 (2017-2024 / MK 2) Here are the instructions to reset the tyre pressure warning light on the Peugeot 5008 and 3008; before performing the reset, ensure all four tyres a…
Replacing the Daytime Running Lights of the Peugeot 5008
Replacing the Daytime Running Lights of the Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) In this video, you will find the main instructions to remove and replace the daytime running lights or front position lights of the Peugeot 5008. Fir…
Replacing the Front Fog Light Bulb on the Peugeot 5008
Replacing the Front Fog Light Bulb on the Peugeot 5008
Peugeot 5008 (2017-2024 / MK 2) This guide provides instructions for removing and replacing the front fog light bulb on the Peugeot 5008, as well as the 3008. First, move to the fro…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos