Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Lights on a Peugeot 2008

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Fog lights

In today's video, see how to replace the original halogen fog lights with LED ones on the first series of the Peugeot 2008. To make the job easier, it may be beneficial to lift the car using a jack or ramps, allowing you to easily access the area behind the bumper. Unscrew the fog light mounting screw located on the inner side. Now remove the fog light by pulling the plastic frame towards you, releasing the two tabs. Disconnect the connector and you can remove the cover. Replace the bulb with the LED one and reassemble everything.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Front Headlight Bulbs on a Peugeot 2008
Replace the Front Headlight Bulbs on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Want to replace the front headlight bulbs on a Peugeot 2008? Open the front bonnet using the lever located at the bottom right of the steering wheel,…
How to Replace the Front Headlight Bulb on the Peugeot 2008?
How to Replace the Front Headlight Bulb on the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) To replace the front headlight bulb on the Peugeot 2008, open the bonnet to access the engine compartment. Next, remove the cap protecting the rear p…
How to adjust the headlights of the Peugeot 2008
How to adjust the headlights of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Today we will explain how to adjust the front and rear headlights of the Peugeot 2008 model 2 on your own. This operation allows us to have greater i…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos