Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How to reset the Peugeot 208 service light

Model: Peugeot 208 MK 1, A9 - Years 2012-2019
Part: Service Light

If you want to eliminate the maintenance warning light from the display of your Peugeot 208 directly, all you have to do is read the following instructions carefully and put them into practice. It is a very simple operation and can be performed in a few seconds even if you do not have particular experience in the sector. First make sure you have the car turned off. Then locate the button with a wrench depicted above (located in the central part of the dashboard between the tachometer and the speedometer) and keep it pressed. At the same time turn on the car ignition. At this point a short countdown will start. As soon as it finishes, release the button and the reset is complete.


Posted on 6 April 2024 by ScegliAuto



How to reset the "Service" light on a Peugeot 208?
Peugeot 208 (2019-2024 / UW, UB, UP, UJ, MK 2) To reset the "Service" light on a Peugeot 208, start by turning on the instrument panel. Then, access the onboard computer using the buttons on the s
How to reset the service light on the Peugeot 208.
Peugeot 208 (2012-2019 / MK 1, A9) The manual reset procedure for the service light of your Peugeot 208 only takes a few seconds to complete. In fact, it is a rather simple operation t
How do you reset the Peugeot 208 Service light?
Peugeot 208 (2012-2019 / MK 1, A9) To be able to reset the Peugeot 208 Service light, turn the instrument panel on by turning the key inside the ignition lock: once the panel is on, ho

How to set the time of the new Vespa 2023

In our new mini guide dedicated to your new Vespa 2023, we'll find out how to manually change the time displayed on the central console display. So first place your Vespa on the stand. Then insert the key and start the instrument cluster. At this point locate the "Mode" button on the right knob and hold it down for a few seconds. Release it as soon as the time on the panel starts flashing and press it several times to change both the hours and minutes digits. At the end, turn off the ignition and you are done.

Watch the video!


by ScegliAuto

More videos