Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Expert
    4. : How to reset the service on the Peugeot Expert?

Peugeot Expert - Video tutorial

Model: Peugeot Expert Mark2, MK 2 - Years 2008-2016
Part: -board computer
Operation: How to reset the service on the Peugeot Expert?

Each time we replace the oil and filter required by the coupon, it will be necessary to delete the service indication on the instrument panel, to do this it is necessary to proceed as follows: sit in the driver's seat insert the key and switch on the ignition, do not start the engine, locate and press the button with the wrench symbol on the lower part of the dashboard in the center and hold it down for 10 seconds. At the end of these 10 seconds the service signal will have been reset. We can then turn the ignition off and on again to verify the actual shutdown.


Posted on 9 May 2024 by ScegliAuto



How to reset the service light on the 2018 Peugeot Expert
Peugeot Expert (2016-2024 / MK 3, Mark3) On all Peugeot vehicles, the procedure to reset the service light is similar. To reset the service light on the 2018 Peugeot Expert, first turn off t
How to reset the Peugeot Expert service light
Peugeot Expert (1995-2007 / Mark1, MK 1) If the orange service light comes on on the instrument panel of your Peugeot Expert first series (year 1995-2007) despite having already serviced it,
How to reset the service light on Peugeot Expert.
Peugeot Expert (2016-2024 / MK 3, Mark3) In today's video guide, we can see how to reset the service light on a third-generation Peugeot Expert, a model produced from 2016 to the present. Fi

Other guides that may interest you

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos