Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on Peugeot 508

Model: Peugeot 508 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

In this video tutorial, see how to reset the maintenance light on a Peugeot 508 by following simple steps that will help you work independently. Before resetting the service light, it is advisable to change the oil and filter.

After performing the DIY service, get in the vehicle, insert the key, and turn on the ignition. When all the lights are on, notice that the maintenance light with the spanner remains illuminated; at this point, turn off the ignition and press the button located under the speedometer (000). A countdown will start, hold the button until the countdown finishes, and then a message will appear on the display (Re-initialisation performed) followed by 0. Now turn off and then turn on the ignition again to verify the reset was successful.


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Peugeot 508
How to Reset the Service Light on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) Resetting the service light for the car service on a Peugeot 508 follows simple and quick steps that can be done independently. Peugeot vehicles, lik…
How to reset the service light on the Peugeot 508
How to reset the service light on the Peugeot 508
Peugeot 508 (2010-2018 / MK 1) The service light activates on the vehicle when it is necessary to perform the car service, immediately after we can proceed with the reset of the se…
How to Reset the Service Light on a Peugeot 508
How to Reset the Service Light on a Peugeot 508
Peugeot 508 (2010-2018 / MK 1) If you own a Peugeot 508 first series (2010-2018) and want to learn how to manually reset the service light, follow the steps in this guide. First, e…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos