Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuses on a Peugeot 1007

Model: Peugeot 1007 MK 1 - Years 2005-2010
Part: Fuse box

To replace the fuses in the Peugeot 1007's cabin, start by removing the cover located under the buttons for opening the doors, where you will find the fuses; to change a fuse (with the internal bridge broken), use tweezers to extract the fuse, while if the internal bridge of the fuse is intact, it does not need replacing; after removing the faulty fuse, take a new fuse of the same amperage and place it in the position of the broken one. Perform the same procedure to replace the fuses located in the engine compartment, where you need to remove the cover found on the right side (driver's side), where you will find additional fuses.

Updated on 25 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Where are the fuses located in the Peugeot 1007?
Where are the fuses located in the Peugeot 1007?
Peugeot 1007 (2005-2010 / MK 1) The fuses of the Peugeot 1007 are located inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will be pos…
What is the fuse layout of the Peugeot 1007?
What is the fuse layout of the Peugeot 1007?
Peugeot 1007 (2005-2010 / MK 1) If the devices of our Peugeot 1007 have suddenly stopped working, we can first of all check the status of the corresponding fuses whose diagrams are …
What is the Fuse Diagram for the Peugeot 1007?
What is the Fuse Diagram for the Peugeot 1007?
Peugeot 1007 (2005-2010 / MK 1) If any of the various devices in your Peugeot 1007 suddenly stop working, the first thing to do is check the status of the respective fuses, whose lo…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos