Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Number Plate Light

Model: Peugeot 107 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: License plate light

Video tutorial

The number plate light is integrated into the rear bumper, on either side of the number plate: to replace it, you need to remove the entire lamp holder from the bumper and disconnect the power connector; once the lamp holder is removed, detach the protective lens and extract the bulb to replace it with a new one (bayonet fitting); reattach the lens, reconnect the power connector, and check its operation before refitting the lamp holder into the bumper.

If you notice a difference in brightness with the other bulb, proceed in the same way to replace that one as well.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

How to Replace the Number Plate Light Bulbs on a Peugeot 107?
How to Replace the Number Plate Light Bulbs on a Peugeot 107?
Peugeot 107 (2005-2014 / MK 1) In this tutorial, you will see how to replace the number plate light bulbs on a Peugeot 107, a very simple and quick operation. First, ensure that th…
Guide to Dismantling the Centre Console of the Peugeot 107 - Citroen C1
Guide to Dismantling the Centre Console of the Peugeot 107 - Citroen C1
Peugeot 107 (2005-2014 / MK 1) This guide outlines the main steps to dismantle and replace the centre console of the Peugeot 107 and Citroen C1. First, get in the vehicle and start…
Replacing the Air Filter in a Peugeot 107
Replacing the Air Filter in a Peugeot 107
Peugeot 107 (2005-2014 / MK 1) This guide shows how to replace the engine air filter in a Peugeot 107. Open the car door, pull up the bonnet release lever located at the bottom lef…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos