Do it yourself
Frequently asked questions about cars and motorcycles

Refilling Ad Blue in a 2017 Peugeot 208 1.6 HDI

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Antifreeze coolant

The video shows how to refill Ad Blue in the respective tank of a 2017 Peugeot 208 1.6 HDI. This is a very simple operation that can be done without visiting a mechanic. It is advisable to have a large funnel to avoid any "flooding" in the engine bay. Open the rear bonnet, lift the boot panel, remove the spare wheel, open the tank cap, position the funnel correctly, and begin pouring the fluid until the tank is full. Close the tank and check that the warning light for low Ad Blue is off.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 208 (2012-2019 / A9, MK 1) Let's see how to change the filter and engine oil on a Peugeot 208 MK1 1.6 Blue HDI. We open the oil filler cap, add pre-change detergent to warm eng…
Peugeot 208 (2012-2019 / A9, MK 1) Today's guide provides the main instructions for removing and replacing the timing belt on the Peugeot 208 1.6 HDI; for this engine type, the manufac…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos