Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the AdBlue Warning Light and Replace AdBlue in the Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: AdBlue warning light

AdBlue is a special additive used in Diesel engines to reduce the amount of pollutants released into the air. After driving a considerable distance, it is necessary to refill the dedicated tank. Whenever the level is too low, a warning light appears on the dashboard. Here’s how to do it. First, ensure the car is off and obtain a new container of AdBlue. Next, go to the rear of the car and open the fuel flap. Unscrew the blue cap. Using a funnel or a rubber hose, pour the new AdBlue into the dedicated tank. Refit the cap and close the flap. At this point, the warning light should also have disappeared.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 308 (2013-2021 / T9, MK 2) This guide explains how to reset the AdBlue warning light on the Peugeot 308, as well as the 3008. Before resetting, ensure that the AdBlue fluid is …
Peugeot 308 (2013-2021 / T9, MK 2) This guide provides the main instructions to reset the AdBlue warning light on the Peugeot 308. Before resetting the light, ensure you have topped up…
Peugeot 308 (2013-2021 / T9, MK 2) To reset the AdBlue warning light on a Peugeot 308, top up the fluid through the designated filler located inside the boot. To access it, open the re…

Other guides you may be interested in

    Frequently Asked Questions

    • 308 2013-2021 - Where do you refill the AdBlue on the Peugeot 308? Read answer
    • 308 2007-2014 - Where is the AdBlue fuse on a Peugeot 308? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos