Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing Window Regulator

Model: Peugeot 407 MK 1 - Years 2004-2012
Part: Power window motor

To replace the window regulator motor, you must first remove the door trim panel: remove the cap in the centre of the glove compartment, then unclip the cover of the internal handle, the trim around the opening lever, unscrew the other screws along the edges, and lever to unclip the pressure clips. Once the panel is removed, take out the soundproofing sheet, unscrew the glass retaining pins to remove the glass, and proceed to disassemble the window mechanism which includes the regulator and the motor.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Window Regulator on a Peugeot 407?
How to Replace the Front Window Regulator on a Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) To replace the window regulator on a Peugeot 407, first loosen the screws that secure the corresponding door panel: these screws are located under th…
Replacement of the power window system on Peugeot 407
Replacement of the power window system on Peugeot 407
Peugeot 407 (2004-2012 / MK 1) Disassembly of the door panel: remove the cap in the center of the door pocket. Detach the cover of the inner handle. Remove the trim frame of the op…
How to reassemble the rear window regulator of a Peugeot 407
How to reassemble the rear window regulator of a Peugeot 407
Peugeot 407 (2004-2012 / MK 1) In this video, we see how to change the window regulator of a Peugeot 407: The video refers only to the replacement of the window regulator, without …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos