Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Battery from a Peugeot 308 T9 (MK2)

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Battery

See other generations:
Video tutorial

In this brief and simple guide, we will see how to remove and replace the battery on the Peugeot 308 T9, second series, following the instructions below. First, open the bonnet and start by unscrewing the screws of the bracket located above the battery using a T30 Torx key; then unscrew the screw of the brake fluid reservoir as shown in the video.

At this point, unscrew the additional screws located below on the battery bracket; use a socket spanner to unscrew the terminal screws (positive and negative), thus replacing the battery!


Updated on 8 June 2026 by ScegliAuto


Related tutorials

Peugeot 308 (2013-2021 / T9, MK 2) In this video, you will learn how to remove the battery from a Peugeot 308 MK2: Above the battery, there is an electrical plate to which the positive…
Peugeot 308 (2013-2021 / T9, MK 2) Here are the instructions to remove and replace the battery in a Peugeot 308, in simple and quick steps. First, open the bonnet of the vehicle and st…
Peugeot 308 (2007-2014 / T7, MK 1) Need to change the battery on a Peugeot 308? Remove the battery if it is damaged. Open the car door and pull up the lever to open the engine compartm…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Remove the Cabin Fan in the Nissan Qashqai?

The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws.

Watch the video!


by ScegliAuto

More videos