Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery in a Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Battery

See other generations:
Video tutorial

Here are the instructions to remove and replace the battery in a Peugeot 308, in simple and quick steps. First, open the bonnet of the vehicle and start by disconnecting both battery terminals (positive and negative).

Then, unscrew the securing bolt of the bracket located at the bottom, as shown in the video. Now, remove and replace the battery with a new one of the correct type and the same amperage; place it in the battery compartment and connect it electrically, securing it with the bolt on the bracket!


Updated on 8 September 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery for Peugeot 308 Vehicles
How to Replace the Key Battery for Peugeot 308 Vehicles
Peugeot 308 (2013-2021 / T9, MK 2) Today, you will learn how to replace the battery of the remote key for the Peugeot 308 independently. To replace the battery, insert a flathead screw…
Changing the Battery on a Peugeot 308
Changing the Battery on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Need to change the battery on a Peugeot 308? Remove the battery if it is damaged. Open the car door and pull up the lever to open the engine compartm…
Replacing the Battery of a Peugeot 308
Replacing the Battery of a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) In this video, you will see how to replace the battery of a Peugeot 308. First, lift the bonnet of your car: disconnect the negative and positive ter…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos