Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery of a Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Battery

In this video, you will see how to replace the battery of a Peugeot 308. First, lift the bonnet of your car: disconnect the negative and positive terminals. Now, remove the two screws of the battery support (located next to the battery below). Disconnect the connector (of the control unit) that you see in front, possibly using a pointed screwdriver. Now, remove the screws at the bottom of the metal bracket of the battery: at this point, proceed with removing the battery and replacing it.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Changing the Battery on a Peugeot 308
Changing the Battery on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Need to change the battery on a Peugeot 308? Remove the battery if it is damaged. Open the car door and pull up the lever to open the engine compartm…
How to Replace the Battery of a Peugeot 308 1.2
How to Replace the Battery of a Peugeot 308 1.2
Peugeot 308 (2013-2021 / T9, MK 2) Before you start, open the bonnet of your Peugeot 308 1.2. Begin by removing the upper battery bracket, then move the cover of the positive terminal …
How to Replace the Power Battery in the Peugeot 308?
How to Replace the Power Battery in the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) Replacing the power battery in a car is probably the most common DIY task carried out by motorists, given the relative ease of the job. Let's see how…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos