Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Procedure for Bleeding the Fuel Pump and Filter

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Fuel pump

After any intervention, even the simplest, such as changing the fuel filter, you must always bleed the air from the fuel injection system. Once the bonnet is open, remove the engine protection cover. To do this, turn the plastic screws a quarter turn and take off the cover. Once you locate the filter and the corresponding bleed screw, unscrew it by one turn to release the air. Now, crank the engine for a few seconds. Wait a few seconds and repeat the cranking. You may need to repeat these actions several times until the engine starts. Turn off the engine, fully tighten the bleed screw, and restart the engine to check its proper functioning. Finally, refit the protection cover. Car model: Peugeot 206 HDI 2.0.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Starting the Diesel Pump on a Peugeot 206 HDi
Starting the Diesel Pump on a Peugeot 206 HDi
Peugeot 206 (1998-2012 / MK 1) In this tutorial video, we will see the main steps to prime a diesel pump on a vehicle, in this case, a Peugeot 206 HDi. First, open the bonnet and r…
Instructions for Replacing the Diesel Filter
Instructions for Replacing the Diesel Filter
Peugeot 206 (1998-2012 / MK 1) To replace the diesel filter, first remove the plastic engine cover and locate the filter at the front of the engine. Completely unscrew the drain sc…
Diesel Filter Replacement Instructions
Diesel Filter Replacement Instructions
Peugeot 206 (1998-2012 / MK 1) Keeping the diesel filter clean and efficient is essential to avoid contaminating the pump and injectors; replacing it is extremely simple: once the …

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos