Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light on a Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fog lights

See other generations:
Video tutorial

Fog lights are very important components in your car as they significantly improve visibility in heavy fog. Therefore, regular maintenance and timely replacement of faulty bulbs are essential. To do this, simply follow these instructions.

First, go to the side with the faulty bulb. Locate the hole between the wheel cover and the headlamp (marked by a yellow connector).

Disconnect it and unscrew the small screw present. Pull the entire fog light towards you and remove the old bulb.

Replace it with a new one and correctly reposition the headlamp, ensuring to reconnect the connector and re-screw the previously removed screw.


Updated on 13 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Peugeot 208?
How to Replace the Cabin Filter on a Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) To replace the cabin filter on a Peugeot 208, open the bonnet to access the components inside the engine bay: just below the windscreen, on the passe…
How to Reset the Service Light on the Peugeot 208
How to Reset the Service Light on the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) On the Peugeot 208, resetting the maintenance interval and oil light is done directly from the instrument cluster. With the Peugeot 208 stationary an…
How do you replace the headlight bulb of the Peugeot 208?
How do you replace the headlight bulb of the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) The headlight bulb of the Peugeot 208 can be replaced by opening the hood, so that it is possible to access the components located inside the engine …

    Frequently Asked Questions

    • 208 2012-2019 - How are the rear fog lights activated in a Peugeot 208? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos