Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a Peugeot 208

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Air filter

Changing the air filter on a Peugeot 208 is very simple. You can find the part on all major e-commerce platforms for about £10 for the pollen model. The cabin filter is located to the left of the windscreen, under the perforated flange. Remove the cover by pulling up the three securing clips. Underneath, you will find a cover that you will open using a flat screwdriver. Pull out the cabin filter, which is made up of two halves, and use a blast of air to clean the empty compartment. Now refit the two filter halves, ensuring you pay attention to the correct fitting direction indicated above. Close the cover. Refit the cover. Job done.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on a Peugeot 208?
How to Replace the Cabin Filter on a Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To replace the cabin filter on a Peugeot 208, open the bonnet to access the components inside the engine bay: just below the windscreen, on the passe…
How do you replace the cabin filter of the Peugeot 208?
How do you replace the cabin filter of the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) It will be possible to replace the cabin filter of the Peugeot 208 by opening the hood, so that access can be gained to the panel located at the base…
How to replace the cabin air filter of the Peugeot 208
How to replace the cabin air filter of the Peugeot 208
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) Replacing the cabin air filter in your second-generation Peugeot 208 is very simple. To complete the operation, you must read the following guide and…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos