Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Service on Peugeot Boxer 3

Model: Peugeot Boxer MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Warning light – error code

See other generations:
Video tutorial

Open the driver’s door and access the driver’s seat. To cancel the maintenance warning signal, insert the key into the ignition without turning it on, press the brake pedal and then the accelerator pedal, holding them down simultaneously.

At the same time, turn the ignition key and switch on the ignition (keep the engine off), wait for 3 seconds, then release the brake and accelerator pedals. Finally, turn the key and switch off the ignition.

You can check that the service warning light has turned off by switching the ignition back on.


Updated on 18 June 2026 by ScegliAuto


Related tutorials

How to change the oil in the 2016 Peugeot Boxer?
How to change the oil in the 2016 Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) In the 2016 Peugeot Boxer, you can perform an oil change yourself without spending on professional labour. Remember, however, that every time you cha…
How to Reset the Oil Change Light on a Peugeot Boxer.
How to Reset the Oil Change Light on a Peugeot Boxer.
Peugeot Boxer (1993-2006 / MK 1) When resetting the oil change light on a commercial vehicle like the Peugeot Boxer, always prioritise your safety and that of others. Therefore, rese…
How to Reset the Service Light on the Peugeot Boxer 4?
How to Reset the Service Light on the Peugeot Boxer 4?
Peugeot Boxer (2006-2024 / MK 2) The operations to perform when discussing a service are essentially the oil and oil filter change of the engine, to which, depending on the vehicle's…

Other guides you may be interested in

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos